Upgrade to Pro — share decks privately, control downloads, hide ads and more …

Parallelism in PostgreSQL 11

Thomas Munro
September 06, 2018

Parallelism in PostgreSQL 11

A talk on parallelism in PostgreSQL 11, given at PostgresOpen in San Francisco in September 2018.
https://postgresql.us/events/pgopen2018/schedule/session/548-parallelism-in-postgresql-11/
https://www.youtube.com/watch?v=jWIOZzezbb8

Also presented in a slightly modified form at Wellington Open Source Show and Tell (https://wossat.nz) in New Zealand in October 2018, PostgreSQL Down Under (https://pgdu.org) in Melbourne, Australia in December 2018, and FOSDEM PGDay (https://2019.fosdempgday.org) in Brussels, Belgium in February 2019.

Thomas Munro

September 06, 2018
Tweet

More Decks by Thomas Munro

Other Decks in Programming

Transcript

  1. • PostgreSQL hacker (~3.5 years), newly minted committer (~3 months)

    • Member of EnterpriseDB’s database server development team, based in Wellington, New Zealand • Showed up after all the hard work had been done and added Parallel Hash Join About me Architects of parallelism: Robert Haas, Amit Kapila; Contributors: Ashutosh Bapat, Jeevan Chalke, Mithun Cy, Andres Freund, Peter Geoghegan, Kuntal Ghosh, Alvaro Hererra, Amit Khandekar, Dilip Kumar, Tom Lane, Amit Langote, Rushabh Lathia, Noah Misch, Thomas Munro, David Rowley, Rafia Sabih, Amul Sul, …
  2. Parallel features • PostgreSQL 9.4, 9.5 [2014, 2015] • Infrastructure:

    Dynamic shared memory segments • Infrastructure: Shared memory queues • Infrastructure: Background workers • PostgreSQL 9.6 [2016] • Executor nodes: Gather, Parallel Seq Scan, Partial Aggregate, Finalize Aggregate • Not enabled by default • PostgreSQL 10 [2017] • Infrastructure: Partitions • Executor nodes: Gather Merge, Parallel Index Scan, Parallel Bitmap Heap Scan • Enabled by default! • PostgreSQL 11 [2018] • Executor nodes: Parallel Append, Parallel Hash Join • Planner: Partition-wise joins, aggregates • Utility: Parallel CREATE INDEX
  3. Multi-processing for the masses • 1960s, 1970s: Burroughs B5000 (AMP),

    later IBM System/360 mainframes (AMP), later vector supercomputers (CDC, Cray), …: million of dollars • Early 1980s: VAX (AMP) minicomputers, 2 CPUs (AMP) running VMS $400k+ • Mid-late 1980s: Sequent, 4-30 Intel CPUs
 (SMP, NUMA) running Dynix: $50k - $500k • Early 1990s: “big iron” Unix vendors (SMP/NUMA), $20k+ • Mid-late 90s: sub-$10k dual/quad Intel CPU servers, free Unix-like OSes add support for SMP • Mid 2000s: multi-core CPUs; general purpose uniprocessor operating systems and hardware extinct
  4. Parallel gold rush 79 80 81 82 83 84 85

    86 87 88 89 90 91 92 93 94 95 96 97 98 99 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 7.1 Oracle DB2 4.1 POSTGRES, PostgreSQL 9.6 6.0 Informix Sybase 11.5 SQL Server 7.0 Ingres 2006 = SQL trapped inside IBM = QUEL refusing to admit that SQL won = SQL = parallel query execution
  5. Tandem NonStop SQL beat all of these with a shared-

    nothing multi-node database used by banks and stock exchanges since the 1980s. Originally focused on redundancy, it also scaled well with extra CPUs. Not in the same category because…
  6. Shared everything vs shared nothing • SMP/NUMA: multiple CPU cores

    sharing memory and storage • MPP/cluster: a network of nodes with separate memories and storage, communicating via messages • Overlapping problems, and some MPP systems may also have intra-node shared memory }The topic of this talk
  7. Simple example:
 vote counting • Scrutineers: • Grab any ballot

    box and count up all the votes (= scatter data and process it) • Repeat until there are no more boxes • Chief scrutineer: • Wait until everyone has finished • Gather the subtotals and sum them © Ipswitch Star
  8. EXPLAIN ANALYZE SELECT COUNT(*)
 FROM votes WHERE party = ‘Democrats';

    Aggregate (cost=181813.52..181813.53 rows=1 width=8) (actual time=2779.089..2779.089 rows=1 loops=1) -> Seq Scan on votes (cost=0.00..169247.71 rows=5026322 width=0) (actual time=0.080..2224.036 rows=5001960 loops=1) Filter: (party = ‘Democrats'::text) Rows Removed by Filter: 4998040 Planning Time: 0.101 ms Execution Time: 2779.142 ms Finalize Aggregate (cost=102567.18..102567.19 rows=1 width=8)
 (actual time=1029.424..1029.424 rows=1 loops=1) -> Gather (cost=102566.97..102567.18 rows=2 width=8) (actual time=1029.233..1030.188 rows=3 loops=1) Workers Planned: 2 Workers Launched: 2 -> Partial Aggregate (cost=101566.97..101566.98 rows=1 width=8) (actual time=1023.294..1023.295 rows=1 loops=3) -> Parallel Seq Scan on votes (cost=0.00..96331.21 rows=2094301 width=0) (actual time=0.079..824.345 rows=1667320 …) Filter: (party = ‘Democrats'::text) Rows Removed by Filter: 1666013 Planning Time: 0.126 ms Execution Time: 1030.279 ms max_parallel_workers_per_gather = 2 max_parallel_workers_per_gather = 0
  9. Parallel plan Seq Scan Parallel Seq Scan Partial Aggregate Partial

    Aggregate Partial Aggregate Gather Finalize Aggregate Parallel Seq Scan Parallel Seq Scan • Each worker (W) runs a copy of the plan fragment beneath the Gather node • The leader process (L) may also run it • Parallel-aware nodes coordinate their activity with their twins in other processes L W W }Scatter }Gather
  10. Processes 13316 └─ postgres -D /data/clusters/main 13441 ├─ postgres: fred

    salesdb [local] idle 13437 ├─ postgres: fred salesdb [local] idle 13337 ├─ postgres: fred salesdb [local] SELECT 13323 ├─ postgres: logical replication launcher
 13322 ├─ postgres: stats collector 13321 ├─ postgres: autovacuum launcher 13320 ├─ postgres: walwriter 13319 ├─ postgres: background writer 13318 └─ postgres: checkpointer "Currently, POSTGRES runs as one process for each active user. This was done as an expedient to get a system operational as quickly as possible. We plan on converting POSTGRES to use lightweight processes available in the operating systems we are using. These include PRESTO for the Sequent Symmetry and threads in Version 4 of Sun/OS." Stonebraker, Rowe and Herohama, “The Implementation of POSTGRES”, 1989
  11. Parallel worker processes 13316 └─ postgres -D /data/clusters/main
 25002 ├─

    postgres: parallel worker for PID 13337
 25001 ├─ postgres: parallel worker for PID 13337 13441 ├─ postgres: fred salesdb [local] idle 13437 ├─ postgres: fred salesdb [local] idle 13337 ├─ postgres: fred salesdb [local] SELECT 13323 ├─ postgres: logical replication launcher
 13322 ├─ postgres: stats collector 13321 ├─ postgres: autovacuum launcher 13320 ├─ postgres: walwriter 13319 ├─ postgres: background writer 13318 └─ postgres: checkpointer Currently, PostgreSQL uses one process per parallel worker. This was done as an expedient to get a system operational as quickly as possible. We plan on converting PostgreSQL to use POSIX and Windows threads.* *Actual plans may vary
  12. L Shared memory • Traditionally, PostgreSQL has always had a

    fixed-sized chunk of shared memory mapped at the same address in all processes, inherited from the postmaster process • For parallel query execution, “dynamic” shared memory segments (DSM) are used; they are chunks of extra shared memory, mapped at an arbitrary address in each backend, and unmapped at the end of the query Buffer pool DSM for query L L W W L = Leader process W = Worker process
  13. IPC and communication • PostgreSQL already had various locking primitives

    and atomic primitives, but several new things were needed for parallel query execution • Shared memory queues for control messages and tuples • Condition variables, barriers, relocatable LWLocks • Special support in heavyweight locks • … Tuple queue L W DSM
  14. Parallel awareness • Nodes without “Parallel” prefix can be called

    “parallel-oblivious*” operators: • They can appear in a traditional non- parallel plan • They can appear underneath a Gather node, receiving partial results • They can appear underneath a Gather node, receiving complete results • Parallel-aware operators perform some kind of scattering (or in some cases gathering) *my terminology, because “non-parallel” is a bit confusing Parallel Seq Scan Parallel Hash Seq Scan Hash
  15. 8kb 8kb 8kb 8kb Parallel Seq Scan • Each process

    advances a shared ‘next block’ pointer to choose an 8KB block whenever it runs out of data and needs more, so that they read disjoint sets of tuples • The goal is not to read in parallel, but rather to scatter the data among the CPU cores where it can be (1) filtered in parallel and (2) processed by higher executor nodes in parallel W W L next …
  16. Operating system view 8kb 8kb 8kb 8kb 4kb W W

    8kb 8kb L 8kb 32kb (or 128kb, or …) 32kb • Processes read 8kb pages into the PostgreSQL buffer pool • The OS’s read- ahead heuristics detects this pattern and ideally begins issuing larger reads to the disk to pre-load OS page cache pages • Details vary: for Linux, see the read-ahead window size 4kb 4kb 4kb 4kb 4kb 4kb 4kb 4kb 4kb 4kb 4kb 4kb 4kb
  17. Parallel Index Scan • BTree only for now • Same

    concept: advancing a shared pointer, but this time there is more communication and waiting involved • If you’re lucky, there might be runs of sequential leaf pages, triggering OS read-ahead heuristics next W L
  18. Parallel Bitmap Heap Scan • Similar to Parallel Seq Scan,

    but scan only pages that were found to potentially contain interesting tuples • The bitmap is currently built by a single process; only the actual Parallel Bitmap Heap Scan is parallel-aware (in principle the Bitmap Index Scan could be too)
  19. Let’s add a join to the example © Sunshine Coast

    Daily • Count only votes from voters who are enrolled to vote SELECT COUNT(*)
 FROM votes
 JOIN voters USING (voter_id)
  20. Nest Loop Join Gather { Scatter { Gather Parallel Seq

    Scan Nest Loop Join Index Scan Probe Probe Probe Probe Time Non-parallel Parallel Perfectly spherical cow in a vacuum “Parallel- oblivious” join Indexes are already efficiently shared between backends
  21. Hash table Hash table Hash Join Gather { } Duplicated

    effort Scatter { Gather Parallel Seq Scan Hash Join Hash Private hash table Seq Scan Build Probe Time Probe Build Build Build Probe Probe Non-parallel Parallel
  22. Hash table Hash table Hash Join Gather { Scatter {

    Gather Parallel Seq Scan Hash Join Hash Private hash table Parallel Seq Scan We cannot join arbitrarily chosen blocks from two relations. The results would be nonsense!
  23. Parallel Hash Join Gather { Scatter { Gather }Scatter }Gather

    Parallel Seq Scan Parallel Hash Join Parallel Hash Parallel Seq Scan Shared hash table Build Probe Time Probe Build Build Build Probe Probe Non-parallel Parallel
  24. Parallel Hash Join with alternative strategies • Some other systems

    partition the data first with an extra pass through the two relations, and then produce many small private hash tables; they aim to win back time by reducing cache misses • We can do a simple variant of that (see “batches” in EXPLAIN ANALYZE), but we only choose to do so if the hash table would be too big for work_mem (no attempt to reduce cache misses) • If both relations have a pre-existing and matching partition scheme, we can do a partition-wise join (about which more soon) • Some other systems can repartition one relation to match the pre-existing partition scheme of the other relation
  25. Merge Join Gather { Scatter { Gather Parallel Index Scan

    Hash table Hash table } Duplicated effort Sort Private sorted tuples Seq Scan Merge Join No facility for parallel sorting in the executor yet (though CREATE INDEX can)
  26. Partition-wise join Seq Scan Hash Join Seq Scan Append Seq

    Scan Hash Join Seq Scan votes_ca voters_ca votes_ny voters_ny If two relations are partitioned in a compatible way, we can covert a simple join into a set of joins between individual partitions. This is disabled by default in PostgreSQL 11: SET enable_partitionwise_join = on to enable it.
  27. Parallel Append Seq Scan Hash Join Seq Scan Seq Scan

    Hash Join Seq Scan votes_ca voters_ca votes_ny voters_ny Parallel Append Parallel Append’s children can be parallel oblivious nodes only, run in a single process, or include a parallel scan, or a combination of children. This can extract coarse-grained parallelism from cases where block-based parallelism isn’t possible.
  28. Cost-based planner • Think of all the ways you could

    execute a query: we call those “paths” • Estimate the runtime of each in abstract cost units (inputs: statistics, GUCs) • Pick the cheapest path and convert it into a plan ready for execution • For block-based parallelism, we introduce “partial” paths. • For partition-based parallelism, the partitions are represented by appending different paths (which may themselves be partial).
  29. Rule-based parallel degree • Number of workers to consider is

    based on the “driving” table and settings: • ALTER TABLE … SET (parallel_workers = N) • SET min_parallel_table_scan_size = ‘8MB’
 8MB → 1 worker
 24MB → 2 workers
 72MB → 3 workers
 x → log(x / min_parallel_table_scan_size) / log(3) + 1 workers • SET min_parallel_index_scan_size = ‘512kB’ • Number of workers is capped: • SET max_parallel_workers_per_gather = 2
  30. Costs • SET parallel_setup_cost = 1000 • Models the time

    spent setting up memory, processes and initial communication • Discourages parallel query for short queries • SET parallel_tuple_cost = 0.1 • Models the cost of sending result tuples to the leader process • Discourages parallel query if large amounts of results have to be sent back
  31. Memory • SET work_mem = ‘4MB’ • Limit the amount

    of memory used by each executor node — in each process! • The main executor nodes affected are Hash and Sort nodes • In hash join heavy work, the cap is effectively
 work_mem × processes × joins • Beware partition join explosions • Other systems impose whole query or whole system memory budgets — we probably should too.
  32. Some things that prevent
 or limit parallelism • CTEs (WITH

    …) — for now, try rewriting as a subselect • FULL OUTER JOINs — are not supported yet (but could in principle be done with by Parallel Hash Join) • No FDWs currently support parallelism (but they could!) • Cursors • max_rows (set by GUIs like DbVisualizer) • Queries that write or lock rows • Functions not marked PARALLEL SAFE • SERIALIZABLE transaction isolation (for now)
  33. Possible future work • Parallel sorting? • Dynamic repartitioning? •

    Better control of memory usage? • More efficient use of processes/threads? • Parallel CTEs, inlined CTEs [Commitfest #1734] • Cost-based planning of number of workers? • Parallel aggregation that doesn’t terminate parallelism? • Writing with parallelism (no gather!)
  34. Selected parallel hacker blogs: • ashutoshpg.blogspot.com/2017/12/ partition-wise-joins-divide-and- conquer.html • amitkapila16.blogspot.com/2015/11/

    parallel-sequential-scans-in-play.html • write-skew.blogspot.com/2018/01/ parallel-hash-for-postgresql.html • rhaas.blogspot.com/2017/03/parallel- query-v2.html • blog.2ndquadrant.com/parallel-monster- benchmark/ • blog.2ndquadrant.com/parallel- aggregate/ • www.depesz.com/2018/02/12/waiting- for-postgresql-11-support-parallel-btree- index-builds/ • Questions? • Any good/bad experiences you want to share? What workloads of yours could we do better on? • PostgreSQL 11 is in beta, please go and test it and report your findings to pgsql- hackers@ and pgsql- bugs@!